Short answer: Divide 128 by the ratio to get US fluid ounces of oil per gallon of gas: 2.6 oz at 50:1, 3.2 oz at 40:1, 4 oz at 32:1, 5.1 oz at 25:1. For metric, divide 1,000 by the ratio to get milliliters per liter. Get the ratio from your tool’s manual. Use the calculator below, or the printable tables.



2.6 fl oz of 2-cycle oil (76 ml) for 1 US gallon at 50:1.

Oil per US gallon (fluid ounces)

Gasoline 25:1 32:1 40:1 50:1
1 gal 5.1 fl oz 4.0 fl oz 3.2 fl oz 2.6 fl oz
2 gal 10.2 fl oz 8.0 fl oz 6.4 fl oz 5.1 fl oz
2.5 gal 12.8 fl oz 10.0 fl oz 8.0 fl oz 6.4 fl oz
5 gal 25.6 fl oz 20.0 fl oz 16.0 fl oz 12.8 fl oz

Oil per liter (milliliters)

Gasoline 25:1 32:1 40:1 50:1
1 L 40 ml 31 ml 25 ml 20 ml
4 L 160 ml 125 ml 100 ml 80 ml
5 L 200 ml 156 ml 125 ml 100 ml
10 L 400 ml 312 ml 250 ml 200 ml

Values are rounded to one decimal place (ounces) or the nearest milliliter. The math: oil = gasoline ÷ ratio. A US gallon is 128 fluid ounces, or 3.785 liters.

How to mix 2-cycle fuel

  1. Find the ratio in your manual. It’s often on the fuel cap or a label near it, too. Don’t guess from another tool, even one from the same brand.
  2. Use fresh gasoline at the octane and maximum ethanol content the manual lists. ECHO, for example, says not to mix more fuel than you’ll use in 30 days, or 90 days with a stabilizer.
  3. Pour about half the gas into a clean, approved can, add all the oil, close it and shake, then add the rest of the gas and shake again.
  4. Label the can with the ratio and the date.
  5. Never put mixed fuel in a 4-cycle engine (mowers, most snowblowers and generators).

If you mix only a quart or two a season, canned premix may be simpler. See canned fuel vs. ethanol-free pump gas for the cost per gallon, and best fuel for a snowblower for 4-cycle machines.

Frequently asked questions

How much oil do I add to a gallon of gas for 50:1?

2.6 US fluid ounces (128 ÷ 50 = 2.56). For 2.5 gallons at 50:1 it’s 6.4 fluid ounces.

How much oil per gallon for 40:1?

3.2 US fluid ounces (128 ÷ 40).

How much oil per gallon for 32:1?

4 US fluid ounces (128 ÷ 32).

How do I work out milliliters per liter?

Divide 1,000 by the ratio. At 50:1 that’s 20 ml of oil per liter of gasoline; at 40:1 it’s 25 ml.

Where do I find the right ratio for my tool?

In the operator’s manual, and often on the fuel cap or a label near it. Use the manual’s ratio, not a ratio printed on an oil bottle, if they differ. A 4-cycle engine never gets oil in its fuel.

Sources